Stratojet Shark 2512 and R2R Total Solution Printers


A flatbed perfectly suited to print specialty applications with full bleeds up to 8’x4′ and rolls up to 100″. Print up to 4″ thick using UV curable inks that adhere to nearly anything at high quality 2400 dpi output.

Shark 2512 for hard media

Load multiple rolls to increase productivity and efficiency for your business. Air rods stabilize the media and maintaining a consistent feed regardless of the weight of the media. Print 1, 2 or 3 rolls of media or jobs without having to worry about skewing with the Falcon 3300 XL. StratoJet incorporates Accurate Dot Placement technology (ADP) which integrates a printer controller system for color management software to assign a specific drop size and position, allowing the user to print sharp text and line art with vibrant colors and speed.

With production speeds over 1000 ft2/hr, there are no wait times as prints come out dry for finish delivery thus reducing time monitoring the printer along with low maintenance printing. Get more scratch resistance than any other technology in this segment, reducing the risk of any damage or inks smudged prints.

The Falcon 3300 XL has adapted an innovative and unique roller media feed system that removes all media handling and movement issues that are notorious issues with a traditional pinch roller mechanism. This makes this printer faster with more consistent high-quality printing than any other printer in its class.

The StratoJet Falcons use the latest Grayscale Drop on Demand Piezo print heads, known for its high quality, durability and consistent performance, that comes with a special circuit board to allow for individually control of pressure, temp and purging.

StratoJet’s variable drop size, grayscale technology and ADP (Advanced Drop Placement) allows you to print a variable drop size at 5, 10, and 15 picoliters (PL) and overlaying the drops achieving a printing resolution up to 2400 dpi.

Innovative and Robust

To increase reliability, StratoJet uses high-end Servo motors instead of using significantly inexpensive and low consistency DC motors. To ensure fidelity across the print image, particularly when working on tiled applications. StratoJet chooses to use an ink delivery system that ‘pulls’ the ink with vacuum, instead of the much less efficient positive pressure system, all other printers use. Ever heard of Inks drying in the Heads…?

Remote Tech

We use the highest quality components in our printers and designed ground up with serviceability in mind. If there’s an issue, with a password, we log into your printer remotely, then read, evaluate log files and fix issues remotely; yes, remotely! We found the most of service calls are not due to hardware issues. Stratojet starts by training our technicians to be application experts before they become a hardware technician.

More for Less

Our Water Cooled LED Curing Lamps have exceptional long life, and not a consumable part and low-power consumption. The lamps don’t need to warm up, need to be be adjusted and instantly cures the ink, while generating low heat, to allow more print applications that are heat sensitive. Depending on the media or printing environment, static can cause quality issues, so to minimize this, an anti-static bar is built into the printer carriage.

Handling NO Pinch Rollers, Dual Roll feed, Dual Take-Up Reel, Dual Air Rods
Max Thickness 20 mil (0.5 mm)
Roll Media Support Up to 131” wide (3.3m wide)
Media Type Banners, Vinyls, Papers, Fabrics, Backlit Fabric
Maximum Speed 6 Print Heads: 1210 ft2/hr (113 m2/hr) 4 Print Heads: 650 ft2/hr (60 m2/hr)
Production Speed 6 Print Heads: 350 ft2/hr (33 m2/hr) 4 Print Heads: 240 ft2/hr (22 m2/hr)
Quality Speed 6 Print Heads: 265 ft2/hr (25 m2/hr) 4 Print Heads: 165 ft2/hr (15 m2/hr)
Print Head Resolution 2400 dpi
Drop Size Variable 5, 15 & 25 Picoliters with ADP (Advanced Dot Placement)
Maximum Print Width 126” (320 cm)
Printhead Grayscale drop on demand piezo
UV Curing Lamp Type LED, estimated life 18,000* hrs
Ink Type Sola UV Curable Ink
Ink Capacity 2.5 Liter Reservoirs
Connectivity USB
Supported RIP Software Ergosoft / Onyx / Flexi / Caldera / StratoFlex
Assembled Dimensions (L x W x H) 218”x 40”x 67” (554 x 100 x 169 cm)
Shipping Dimensions (L x W x H) 226”x44”x76” (572 x 110 x 192 cm)
Shipping Weight ~6614 lbs (~3000 Kg)
Temperature 68 to 79 F (20 to 26 C)
Humidity 40% to 70% Non-Condensing
Electrical 208 – 220 VAC 50/60 Hz 30A, Single Phase, Single Plug
Weight Assembled ~5071 lbs (~2300 Kg)
TIME IS MONEY! Time Savings Compared to other Current Printers
Overall Print Speed 90%
Head Prep and Purge 73%
Roll Media Support 81%
Less Maintenance and Upkeep 83%
Output Quality At Speed 95%
Uptime 85%
Durability 75%