Menu
Specialized Production, In-House Prototyping
APPLICATIONS
Dual Tool Holder – Tool 1: 500gf | Tool 2: 1000gf
Provided Tools Suitable for Multiple Applications
The FCX2000 has 2 Tool Holders in the Carriage. Using 2 different tools allows you to do 2 different jobs without exchanging tools, which increases work efficiency.
Use Cutting and Creasing Tools Together
Dual Tool Holders which can hold a cutting blade and creasing tool to produce creases/folds and cuts on the same run.
Stronger Media Hold-Down
Distance between the holes has been improved from 30 mm on FC2250 Series to 20 mm on FCX2000 Series, as a result, FCX2000 Series provides stronger suction power to hold heavier and thicker medias down.
Intuitive Operation with 3.7″ LCD
Onboard control and settings are simplified using the equipped 3.7” LCD (240×128 dots) and tactile control panel.
Improved Y-bar Rigidity: For precision cutting accuracy
Safety enhancement: A new, dedicated emergency STOP switch is at the ready.
Supports a dedicated stop switch for stopping the machine when emergency case is occurred.
Roll-media stocker: The FCX2000 comes equipped with a mounted roll-media stocker.
Supports media width up to 37.4” and weight up to 11 lbs.
Offline Operation using USB Thumb Drives
Cut and plot data is created with Cutting Master 4 or Graphtec Pro Studio software. The saved data may be transferred to a USB Thumb Drive and the cut plot data file can be selected from the USB on the FCX2000 using its menu operations. This simplified work-flow enables users to operate without being connected to the computer.
Data Management using Bar-code Function with USB flash memory
When performing contour cutting, also known as “Print & Cut”, the cutting data is automatically selected from the prepared USB flash memory. The FCX2000 scans the bar code printed on the media then automatically performs the contour cutting job. This emerging method helps to prevent operator error of using incorrect data – thus improving workflow efficiency.
Expanded Contour Cutting Area
This included function expands the print and cut area to include objects outside of the registration marks! Production efficiency is enhanced and media waste is reduced.
Supports Standard Crop Marks
Contour cutting pre-printed media is also possible using “standard crop marks.” This operation is available with the included Cutting Master 4 plug-in workflow.
Reversed Color Registration Marks
Registraiton marks are detectable when there is sufficient contrast against the mark and its background. Ultra glossy and reflective media offer challenges for accurate registration mark detection. With this reversed color output, the sufficient contrast is brought back for the ability to contour cut pre-printed ultra glossy and reflecting sheeting.
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
The Graphtec FCX2000 Series Flatbeds are offered in 3 different table sizes with Vacuum Suction Media Hold Down:
| MODEL | FCX2000-60VC | FCX2000-120VC | FCX2000-180VC | ||
|---|---|---|---|---|---|
| Configuration | Digital servo system, Flatbed | ||||
| Media hold-down method | Vacuum suction | ||||
| Effective cutting area | 24 in x 36 in (610mm x 920mm) | 47.2 in x 36 in (1,200mm x 920mm) | 70.8 in x 36 in (1,800mm x 920mm | ||
| Mountable media (Y-axis) | 3 ft 1.4 in (950mm) | ||||
| Roll media support | Roll media stocker (manual), supported media width up to 950 mm, weight up to 5 kg | ||||
| Maximum cutting speed | 1 ft 3.7 inch/sec (400 mm/sec) (1 to 40 cm/s in 16 steps), in all directions | ||||
| Cutting force | Tool 1: Max. 4.9 N (500 gf), Tool 2: Max. 9.8 N (1 kgf) | ||||
| Cutting force settings | Tool 1: in 40 steps, Tool 2: in 40 steps | ||||
| Minimum character size | Approx. 10 mm square (varies with character font and media) | ||||
| Programmable resolution | GP-GL mode: 0.1/0.05/0.025/0.01 mm, HP-GL™ : 0.025 mm | ||||
| Distance accuracy | Max. 0.1% of the distance moved or 0.1 mm, whichever is larger (in plotting mode) (*2) | ||||
| Perpendicularity | Max 0.5 mm / 900 mm (in plotting mode) | ||||
| Repeatability | Max 0.1 mm (excluding contraction of media, in plotting/cutting mode) (*2) | ||||
| Standard interfaces | RS-232C, USB2.0 (High-Speed), and Ethernet (10BASE-T/100BASE-TX) | ||||
| Buffer memory | 2MB | ||||
| Command sets | GP-GL and HP-GL™ emulation (set by menu, or selects automatically by received data) | ||||
| Number of tools | Two tools | ||||
| Cutting blade, pen, and tool types | Cutting blade (supersteel), Pens (Water-based fiber-tip pen, oil-based ballpoint pen), and Creasing/scoring tool | ||||
| Others | ARMS, Reverse side Cutting/Creasing using ARMS, ARMS Copy function, Creasing, Cutting/creasing in multiple passes | ||||
| Power source | 100 to 240 VAC, 50/60 Hz (Auto switching) | ||||
| Power consumption | Max. 140 VA | ||||
| Pumps | 110V has 1.5 horse power, 220V has 2.5 horse power | ||||
| Operating environment | Temperature: +10 to +35 ºC, Humidity: 35 to 75% RH (non-condensing) | ||||
| Guaranteed accuracy environment | Temperature: +16 to +32 ºC, Humidity: 35% to 70% RH (non-condensing) | ||||
| External dimensions [W x D x H] (Approx.) | W 52.9 x D 55.4 x H 36.6 in 1344 x 1409 x 930 mm (Including stand) | W 76.1 x D 55.4 x H 36.6 in 1934 x 1409 x 930 mm (Including stand) | W 99.7 x D 55.4 x H 36.6 in 2534 x 1409 x 930 mm (Including stand) | ||
| Weight (Approx.) | 167.5 lb (Including stand) (*3) | 218.2 lb (Including stand) (*3) | 225.7 lb (Including stand) (*3) | ||
| Compatible OS (*4) | Windows 11 /10 / 8.1 / 64-bit editions & MacOS 10.2 (Sierra) to 10.13 (Ventura) | ||||
| Included Software (*5) | Graphtec Studio 2, Cutting Master 5 Plug-in for Windows and Mac | ||||
| Compatible Standards | Safety | UL60950-1/cUL, CE marking (Low voltage and EMC) | |||
| EMC | FCC-A, EN55032-A | ||||
*1. Available in a limited region. Please contact your local representative of Graphtec.
*2. When operated with Graphtec specified media and conditions.
*3. Vacuum Pump for media hold-down system is not included.
*4. For more information about Windows and Macintosh compatibility, please check the website or contact your local representative of Graphtec.
10% OFF
GRAPHTEC ACCESSORIES
when you register any Graphtech Cutter.
Contact us for more details.