FCX4000 SERIES PLOTTER

High Precision Cut and Crease

Graphtec FCX4000 Series achieves high quality cutting with improving of the quality and accuracy by enhancing rigidity of the sliding mechanism and the driving system. It is the best flatbed type cutting plotter that has a high usability and productivity equipped with new functions. Graphtec FCX4000 is an affordable cutting solution for small to medium print on demand jobs – using electrostatic to hold media. The 60ES model cleanly fits four A3 + sheets for high productivity. Operation is intuitive with its new control panel, 3.7” LCD screen, and USB / Barcode functionality. Max. Speed 29.5″/sec, Max. Force 600 gf.

Professional flatbed cutting plotters (in a more compact size) capable of processing various materials with accuracy compliant to most industry requirements for pattern making. FCX4000 Series are the ideal cutting plotter for high-precision and medium-heavy material crafting jobs and is suitable for cutting intricate designs on vinyl, photo-masking films, foam material, cardboard, oil board, and sandblast resist rubber. Suitable for PET (polyethylene terephthalate), Polyamide, Stiff paper, Cardboard, Microflute board or Industrial materials with precise adjustable cut pressure up to 600 gf. Flatbed FCX4000 Series is the most economical solution for cutting thick, hard materials that cannot be fed through a roll-feed/friction-feed cutting plotter.

Graphtec FCX4000 Series come standard with a dual head configuration allowing pens, cutting tools, and creasing tools to be loaded simultaneously. A new reverse creasing function allows alignment and creasing on the reverse side of the printed card stock to prevent traces of the creasing operation from appearing on the printed surface. A simple function to create fold lines for clean folding on micro-flute and cardboard has been enabled. Up to three fold lines can be selected. If two or three fold lines have been selected, the spacing between the lines can also be specified. Repeated creasing operations can also be specified for each of the lines.

Cutting and creasing can be carried out from reverse-side when using the registration marks. This prevents crease line from appearing on the printed surface. Graphtec FCX4000 Series are perfect for designers and prototyping in the offset printing, digital printing, packaging industry, fashion industry, as well as road sign making, stone & glass sandblasting/etching, the electronic film industry, and architectural model building.

APPLICATIONS

10% OFF

GRAPHTEC ACCESSORIES

when you register any Graphtech Cutter.

Contact us for more details.

Stronger Media Hold-Down

The FCX4000 Table employs 110 Volt Electro-Static Hold-Down Technology suitable for securing light-weight material which assures precise cuts without slipping.This feature holds media in place utilizing an electrostatic charge that is generatedby electrodes arranged inside the panel.

Provided Tools Suitable for Multiple


Intuitive operation with 3.7″ LCD Control Panel

Settings can be easily set using the large 3.7-inch LCD (240 x 128 dots).



Offline Operation using USB Flash Memory

Cut and plot data is created with Cutting Master 4 or Graphtec Pro Studio. That saved data may be transferred to a USB flash memory and the cut plot data file can be selected from the USB on the FCX4000 using its menu operations. This simplified work-flow enables users to operate without being connected to the computer.



Data Management using Barcode Function with USB Thumb Drive

When performing contour cutting, also known as “Print & Cut”, the cutting data is automatically selected from the prepared USB flash memory. The FCX4000 scans the bar code printed on the media then automatically performs the contour cutting job. This emerging method helps to prevent operator error of using incorrect data – thus improving workflow efficiency.




Expanded Contour Cutting Area

This included function expands the print and cut area to include objects outside of the registration marks! Production efficiency is enhanced and media waste is reduced.

Supports Standard Crop Marks

Contour cutting pre-printed media is also possible using “Standard Crop Marks.” This operation is available with the included Cutting Master 4 plug-in workflow.

Reversed Color Registration Marks

Registration marks are detectable when there is sufficient contrast against the mark and its background. Ultra glossy and reflective media offer challenges for accurate registration mark detection. With this reversed color output, the sufficient contrast is brought back for the ability to contour cut pre-printed ultra glossy and reflecting sheeting.

2 different table sizes are available. The effective cutting area of the 50ES model is expanded for supporting 2 sheets of A3+ size, and the 60ES model supports 4 sheets of A3+ size, which is more suitable for post-processing of Print On Demand:

MODELFCX4000-50ESFCX4000-60ES (stand optional)
ConfigurationDigital servo system, Flatbed
Media hold-down methodElectrostatic panel
Effective cutting areaW 25.98″ x H 19.21″W 38.4″ x H 25.9″
Mountable media
(Y-axis direction)
21.10″27.97″
Maximum cutting speed29.5″/s (1 to 75 cm/s in 23 steps)
Cutting pressureTool 1: Max. 5.88 N (600 gf)
Tool 2: Max. 5.88 N (600 gf)
Cutting force settingsTool 1: in 48 steps, Tool 2: in 48 steps
Minimum character sizeApprox. 10 mm square (varies with character font and media)
Mechanical resolution0.005 mm (5µm)
Programmable resolutionGP-GL mode: 0.1/0.05/0.025/0.01 mm,
HP-GL™ (*1) : 0.025 mm
Distance accuracyMax.0.2% of the distance moved or 0.1mm, whichever is larger
(excluding contraction of media, in plotting/cutting mode) (*2)
PerpendicularityMax 0.3 mm / 16.93″
(excluding contraction of media, in plotting/cutting mode)
Max 0.4 mm / 24.01″
(excluding contraction of media, in plotting/cutting mode)
RepeatabilityMax 0.1mm (excluding contraction of media, in plotting/cutting mode)(*2)
Standard interfacesUSB2.0 (Full Speed) / RS-232C / Ethernet (10BASE-T/100BASE-TX)
Buffer memory2MB
Command setsGP-GL / HP-GL™ / AUTO (Automatic switching in GP-GL and HP-GL™)
Number of tools2 tools
Cutter blade, pen, and tool typesCutter blade: supersteel
Pen: water-based fiber-tip pen
Creasing/scoring tool
Operating panel3.7-inch graphical LCD (same LCD as the FCX2000)
New featuresDual configuration, Creasing in the curve, Perforation cutting (performed by the force control), Data management using the bar-code, Offline cutting operation using the USB memory, Display the degree of wear for the cutting blade, Confirming the cutting object size, Draft mode (higher throughput in arc)
Power supply100 to 240 V AC, 50/60 Hz (Auto switching)
Power consumptionMax. 120 VA
Operating environmentTemperature: 10 to 35 degree C ,
Humidity: 35 to 75% RH (non-condensing)
Guaranteed accuracy environmentTemperature: 16 to 32 degree C,
Humidity: 35% to 70% RH (non-condensing)
External dimensions (*3)
(W x D x H)
W 42.87″ x D 35.31″ x H 8.03″W 55.31″ x D 42.08″ x H 8.03″
(including stand : W 55.31″ x D 43.18″ x H 35.27″)
Weightapprox. 63.93 lbs (29kg)approx. 83.77 lbs (38 kg)
(including stand 121.25 lbs (55 kg)
Compatible OS 6(*4)(*5)Windows 11 /10 / 8.1 / 64-bit editions & MacOS 10.2 (Sierra) to 10.13 (Ventura)
Included Software (*6)Graphtec Studio 2, Cutting Master 5 Plug-in for Windows and Mac
Compatible
Standards
SafetyUL/cUL, CE mark
EMCVCCI Class A, FCC Class A, CE mark (EN55032, others)

*1. HP-GL™ is registered trademark of the Hewlett-Packard Corporation of the United States.

*2. When operated with Graphtec specified media and conditions.

*3. Tolerance: +/- 5 mm

*4. Graphtec does not support software/driver used with operating systems that have become obsolete and are no longer supported by the OS developer.

*5. For more information about Windows and Macintosh compatibility, please check the website or contact with your local representative of Graphtec

*6. Software available for download on the Graphtec website.